All-Seasons Closed-Cell Insulation Foam with Ultra-Low GWP

Built for Year-Round Performance. Proven in the Field.

QUIK-SHIELD® YETI is an HFO-blown, closed-cell spray foam engineered for all-season reliability, clean application, and industry-leading insulation performance. It delivers an aged R-value of 7.5 per inch, high yield, and a GREENGUARD® Gold certification—making it a go-to for contractors balancing energy goals, chemical compliance, and install speed. The YETI system uses Honeywell’s Solstice® blowing agent with a GWP of just 1, far exceeding current environmental mandates.

Download Technical Quik-Shield® YETI Documents

Closed-cell spray foam insulation on a wooden beam ceiling in a building under construction.

Why Quik-Shield® YETI

  • All-Season Workhorse
    Formulated for consistent, smooth sprayability in winter, summer, and everything in between.
  • Maximum R-Value, Minimal Touchups
    R-7.5 per inch and a clean, uniform application that cuts down on trimming and rework.
  • Low GWP, LEED-Ready  Solstice®
    HFO technology with ≥10.5% renewable/recycled content and GREENGUARD® Gold certification.

Key Specs at a Glance:

Property Value
Base Closed-Cell Polyurethane
Core Density 2.0 lb/ft³
Compressive Strength >15 psi
Viscosity A: 250 ± 50 cP / B: 550 ± 100 cP
Weight per Gallon A: 1.23 / B: 1.21 (specific gravity)
Color Light brown (liquid)
Packaging 275-gal tote, 55-gal drum
Industrial warehouse insulated with spray foam
Framed wall insulated with Quik-Shield YETI closed-cell spray foam by SWD Urethane, showing even coverage between studs.

Application Conditions:

QUIK-SHIELD® YETI is available in Winter, Intermediate, and Summer blends to accommodate jobsite temperatures and seasonal shifts.

Where It Works:

  • Winter: 45–65°F
  • Intermediate: 65–85°F 
  • Summer: 80–115°F 

Substrates must be clean, dry, and properly prepared. Use high-pressure plural-component spray equipment (minimum 1000 psi dynamic pressure). Apply in ½″ to 2″ passes, reaching full thickness the same day. Precondition drums to 70–80°F for best results. Always follow SWD’s surface prep and ventilation guidelines.

Where It Works:

  • Residential and commercial walls 

  • Attics and unvented roof assemblies 

  • Exterior sheathing and rim joists

  • Basements, crawl spaces, and under-slab insulation 

  • Projects requiring GREENGUARD® Gold compliance

  • Builds targeting LEED or low-VOC certification 

  • Climate zones with extreme temperature swings 

Spray foam insulation installer, insulating closed-cell-spray foam, in new built home's walls.

Whether you’re insulating a new home, tightening an aging building envelope, or chasing high-performance code requirements, QUIK-SHIELD® YETI is the kind of foam crews ask for by name. It sprays smooth, cures clean, and performs in a wide range of temperatures—making it a dependable solution across climates and project types. From energy-conscious upgrades to demanding commercial builds, YETI brings confidence to the job.

A Product That Reflects Our Values

QUIK-SHIELD® YETI represents the kind of product SWD was built to make—smarter, cleaner, and tougher than what came before. With industry certifications, ultra-low GWP, and performance that holds up season after season, YETI is more than just insulation—it’s a commitment to building better, responsibly. From jobsite feedback to lab testing, we create solutions that raise the bar without raising the hassle.

Need Support or Have Questions?

Our technical team is just a call away. We’re with you from bid to build.

CALL: 888-380-2022