An All-Seasons Beast. Now With 10% More Yield.

Monster Results, Unleashed

There has never been a monster like QUIK-SHIELD® YETI XL. The next evolution of the YETI—this spray foam boasts a reduced density of 1.8 pcf, delivering up to 5,500 board feet per set. That means there’s a 10% yield boost without compromising the cold-blooded performance pros rely on.

QUIK-SHIELD® YETI XL covers more ground, cuts machine tweaks, and sprays clean every time. Everything that makes YETI a jobsite staple, engineered to go even further. XL packs an R‑value of 7.5 per inch and an ultra‑low GWP, exceeding the industry’s highest sustainability standards while sealing strong in any climate, all year long.

The yield is massive. The edge is yours.

Download Technical Quik-Shield® YETI XL Documents

Closed-cell spray foam insulation on a wooden beam ceiling in a building under construction.

What Makes QUIK-SHIELD® YETI XL a Monster

  • Massive Yield
    Delivers up to 5,500 board ft/per set.
  • Certified to Perform
    GREENGUARD® Gold certified with HFO tech and ≥10.5% recycled content.
  • Tuned for Any Climate
    Optimized reactivity in humidity + varying climates.
  • Stronger Hold, Smoother Finish
    Cohesion and adhesion that holds firm with every pass so you can spray with confidence.
  • Max R-Value, Less Rework
    R-7.5/inch with a smooth, even finish that cuts down on touch-ups.

Key Specs at a Glance:

Property Value
Formulation Closed-Cell, High Yield, HFO
Seasonality All Weather
R-Value 7.5 at 1”
Nominal Density 1.8 pcf @ 2-3” lift
Average Boardfeet 5,000-5,500
Temperature Settings Summer 105-125°F
Winter 125-145°F
Max Lift 3” or (2”+2”)
Industrial warehouse insulated with spray foam
Framed wall insulated with Quik-Shield YETI closed-cell spray foam by SWD Urethane, showing even coverage between studs.

Application Conditions:

QUIK-SHIELD® YETI XL is crafted for every kind of weather and is ready to accommodate fluctuating jobsite temperatures and seasonal shifts.

Substrates must be clean, dry, and properly prepared. Use caution when opening a drum that has a temperature of 80°F or higher because the contents are under pressure. Precondition material to 60–80°F for best results. Spray YETI XL with a high-pressure plural-component proportioner capable of a minimum of 1100 psi dynamic pressure. Static pressure is typically set between 1200-1600 psi. Substrate temps should be between 20-120°F. Flashing is recommended at lower temps.YETI XL should not exceed 4” per lift, with a minimum 20-30 minute wait time between lifts. Always follow SWD’s surface prep and ventilation guidelines. Refer to the QUIK-SHIELD® YETI XL Processing Guide for additional information.

Where It Works:

  • Residential and commercial walls 

  • Attics and unvented roof assemblies 

  • Exterior sheathing and rim joists

  • Basements, crawl spaces, and under-slab insulation 

  • Projects requiring GREENGUARD® Gold compliance

  • Builds targeting LEED or low-VOC certification 

  • Climate zones with extreme temperature swings 
Spray foam insulation installer, insulating closed-cell-spray foam, in new built home's walls.

Our next level formula, QUIK-SHIELD® YETI XL, tackles every project, in all seasons, with ease. Whether new residential insulation, a thorough insulation upgrade, or an intense commercial installation, crews rely on its high performance and speed of application to get the job done right.

The YETI Legacy

The original YETI raised the bar on closed-cell performance when it hit the market. Now, YETI XL tears the ceiling off. Still built for precision. Still the cold-blooded king of every season.

QUIK-SHIELD® YETI XL brings more bite per barrel. This monster brings higher yield, faster coverage, and dependable control—no matter the season or site conditions. If you’re looking to dominate the jobsite, YETI XL isn’t just up for the challenge. It’s built for it.

Need Support or Have Questions?

Our technical team is just a call away. We’re with you from bid to build.

CALL: 888-380-2022