Spray foam delivers the features that architects and building owners want, such as lower operational costs and durability. You, as an architect, can deliver these features while keeping up with increasingly tough code requirements.
SWD has knowledge of the spray foam industry that is based on over 45 years of experience. Our products outperform traditional insulation methods while meeting code compliant designs through the solutions durability and quality.
With the most innovative products in the spray foam market we ensure our products are installed with the highest quality, ultimately delivering all expected solutions. Our team of building codes and specification specialists can assist with application building codes, engineering, and specifications. SWD brings the most dedicated specialists to you, delivering on all expected solutions.
For more detailed information on wall and roof systems, check out our Architect Booklet below.
case studies
Spray foam roofing systems provides reduction in energy bills to design building
ASU Student Housing Complex Implements Roofing Spray Foam to Maintain High Standards
Spray foam improves building envelope with integrated air barrier solution
spray foam insulation products
QUIKSHIELD 108YM Open-Cell Spray Foam Wall Insulation
QUIKSHIELD 118 Closed-Cell Spray Foam Wall Insulation
spray foam roofing products
For a flat or commercial roof, there is no better roofing solution than a QUIKSHIELD spray polyurethane foam roofing system. QUIKSHIELD roofing spray foam conforms to the roofing surface with a strong bond that provides a seamless monolithic system and contains no thermal shorts. It provides a greater insulation factor, an unsurpassed air-barrier, increased structural stability, and requires less time to install. A QUIKSHIELD roofing system has an effective lifespan that can exceed 30 years and has the lowest lifecycle cost over other conventional roofing systems.
QUIKSHIELD 155 2.5 lb - Roofing Spray Foam
QUIKSHIELD 155 2.8 lb - Roofing Spray Foam
QUIKSHIELD 155 3 lb - Roofing Spray Foam
QUIKSHIELD 1929F - Flame Retardant Acrylic Coating
QUIKSHIELD ROOFING SYSTEM DRAWINGS
- QSR-001 – New Metal Parapet Cap
- QSR-002 – Roof Edge Foam Stop
- QSR-003 – Base Flashing For Wall-Supported Deck
- QSR-003A – Base Flashing Wall-Supported Deck Tall Wall
- QSR-007 – New Expansion Joint
- QSR-007A – Remedial Expansion Joint
- QSR-008 – Typical Existing Area Divider Concrete Wall
- QSR-008A – Typical Existing Area Divider
- QSR-010 – Mechanical Equipment Support New and Remedial
- QSR-011 – Equipment Support Stand
- QSR-013 – Prefabricated Metal Curb
- QSR-014 – Wood Raised Curb
- QSR-015 – Structural Member through Roof Deck
- QSR-018 – Deck Supported Penetration
- QSR-020 – Roof Drain With Fastener
- QSR-020A – Roof Drain Without Fastener
- QSR-021 – Scupper Detail at Parapet Wall
- QSR-022 – Overflow Scupper at Parapet Wall
- QSR-111 – Flat Roof to Shingle or Tile Tie-In
- QSR-121 – Sloped Roof and Crickets
- QSR-122 – Flat Roof Sloped With Foam
- QSR-131 – Remedial Air Conditioner Treatment
- QSR-132 – Existing Pitch Pan
- QSR-133 – Equipment Support on Existing Stand
- QSR-134 – Roof Equipment Protective Wall
- QSR-135 – AC Duct Elbow
- QSR-143 – Class A Metal Fluted Deck with Tape
- QSR-144 – Class B Roof on Combustible Deck
- QSR-145 – Polyiso Board
- QSR-147 – Class A Roof on Combustible Deck with Cementitious Coating
- QSR-151 – Roof Hatch
- QSR-152 – Raised Curb for Skylight
- QSR-153 – Raised Curb for Down Draft Equipment
- QSR-161 – Parapet Wall Detail
- QSR-162 – Foam and Coating Short Parapet Wall
- QSR-163 – New Flashing Wall-Supported Deck
- QSR-164 – Stucco Finish on Parapet Wall
- QSR-165 – Mansard Wall Top and Bottom
SWD Urethane is a member of the U.S. Green Building Council. QUIKSHIELD spray foam is a LEED qualified material and counts towards LEED points.
Most QUIKSHIELD insulation products carry GREENGUARD® GOLD certification, the strictest standard for indoor air quality.